Aviation Structural Mechanic Practice Test

These questions are part of the practice quiz. Start practicing

• Which officer is ultimately responsible for ensuring safety compliance?
• Who should have access to individual login credentials for NALCOMIS?
• What is the primary responsibility of Maintenance Control?
• In terms of maintenance levels, what does O-Level refer to?
• Who ensures all personnel are instructed in safety matters?
• Which maintenance level provides the highest level of support?
• How is torque quantified in practical applications?
• In the work package manual numbering system, what do the last two digits represent?
• Which material is unlikely to be classified as HAZMAT?
• What is the primary use of a socket wrench?
• What does the term "Warning" in technical publications signify?
• What does JCN stand for in the context of aircraft maintenance?
• What does the use of structural bolts ensure in construction?
• What does respiratory PPE protect against?
• What is the implication of "Should" in a technical publication?
• What does the term "deviation" indicate in NAMP context?
• What is emphasized by the term "Note" in technical documentation?
• What does the term "Change" signify in a technical document?
• What signifies an urgent type commander-issued subject in the context of changes to the NAMP?
• In technical documents, what does "Shall" mean?
• Which term refers to a modification in aviation maintenance procedures?
• What does NAMP stand for in the context of aviation maintenance?
• What type of products are Liquid Oxygen and Rocket Engines classified as?
• In the context of mishaps, what does "human error" typically refer to?
• What is the purpose of a conditional inspection?
• Which level of maintenance is considered the lowest and responsible for maintaining aircraft in full mission capability?
• What does NDI stand for?
• If a work manual is marked with "S," what does it indicate?
• What does EXREP stand for?
• What is the primary purpose of labeling containers under the Hazard Communication Standard?
• What is the significance of the term "Change" in technical documents?
• ICRL is an acronym for what?
• What tool is used to break loose very tight nuts and bolts?
• What does "Will" signify in the context of technical publications?
• What type of system does NALCOMIS represent?
• What is the role of Maintenance Control (MC) in the work order process?
• What does unscheduled maintenance primarily address?
• How many feet apart do incompatible materials need to be?
• Which of the following is considered a Class A combustible?
• Which aspect of screw installation helps prevent damage during setup?
• How many volumes does the NAMP comprise?
• What is the purpose of a Safety Data Sheet (SDS)?
• What is identified as a common cause of mishaps?
• Which type of wrench is not typically adjustable?
• Who is responsible for providing training on Safety Data Sheets to personnel?
• What does the acronym NMCS stand for in aviation maintenance?
• What is the main focus of phase inspection?
• When should the VIDS/MAF (OPNAV FORM 4790/60) be utilized?
• What type of screwdriver is best suited for driving screws into tight spaces?
• The Interactive Electronic Technical Manual (IETM) is an example of what type of distribution?
• What are the three main improvements of the work package manual format?
• What does AWP stand for?
• Under what circumstances should torque wrenches be recalibrated?
• Which of the following items is considered a general hazard often found used in aviation?
• Who is typically responsible for logging in to NALCOMIS?
• When is an acceptance inspection conducted?
• How do toxic materials primarily cause harm to humans?
• How can personnel contribute to manual changes in the fleet?
• When should adjustable pliers be used?
• What does the abbreviation O and I stand for in NALCOMIS?
• What does the Federal Supply Classification (FSC) identify?
• What is meant by "Revision" in a technical publication?
• What are the main parts of semi-permanent fasteners?
• What would be a typical application for the .032 size safety wire?
• What duration is typically associated with turnaround inspections?
• What type of information does NALCOMIS provide to O and I level technicians?
• What federal agency is responsible for ensuring compliance with workplace health and safety standards?
• What information is contained in a Safety Data Sheet?
• What could be a reason for not using cotter pins?
• What is the primary use of a rubber mat in safety scenarios?
• A screwdriver with a cross-shaped tip is known as what?
• What specific audience benefits from the use of Technical Manuals?
• What is the primary purpose of structural screws in aviation?
• What is the primary purpose of a Technical Manual?
• What is the flash point of a combustible liquid?
• Who is responsible for restricting aircraft from flight until missing tools or parts are found?
• What is the purpose of hardware safetying in aviation?
• At what angle should you approach the removal of a screw?
• Which type of change is a minor adjustment for editorial or typographical errors within the NAMP?
• What type of information does "Note" provide in a technical publication?
• What defines hazardous waste (HW)?
• Which of the following statements is true regarding self-tapping screws?
• How many digits does a National Stock Number (NSN) consist of?
• Which type of PPE might be most important in a chemical spill scenario?
• What material are structural bolts typically made from?
• What is the definition of a mishap?
• Who is responsible for instructing and drilling all safety precautions and procedures?
• Which of the following is NOT a type of change that can be made to the NAMP?
• Which fasteners are commonly subject to hardware safetying?
• What situation leads to an EXREP status assignment?
• How many main parts do semi-permanent fasteners have?
• Which of the following must have Safety Data Sheets available?
• Which of the following is true regarding structural hardware installation?
• What type of strength do structural screws provide?
• What type of injury can foot PPE help to prevent?
• What is a key use for diagonal pliers?
• What would be considered a substantial hazard to human health or property?
• Foot PPE is primarily designed to protect against which type of hazard?
• Who acts as the principal advisor to the Commanding Officer on aviation safety matters?
• For which type of hardware is double wire typically used?
• In what measurement is the diameter of screws and bolts typically expressed?
• What does the "C" designation represent in a work manual?
• What role does the Maintenance Control (MC) play during the missing tools process?
• What is the recommended length for a pigtail in safety wiring?
• What does the term "Change" refer to in the NAMP?
• In safety wiring, what does the term "double twist" refer to?
• What is the purpose of the Tool Control Program (TCP)?
• What characterizes a special inspection?
• What information is used to etch tools?
• What are the three common sizes of wire used in safety applications?
• What is the first step in the 5-step process for missing tools?
• What is the function of locking pliers?
• What type of wrench operates between obstructions where space for handle swing is limited?
• What is the primary use of duckbill pliers?
• What indicates that the desired torque has been achieved?
• What is the function of turn lock fasteners?
• What is a common critical use for castellated nuts?
• What tool is used to remove someone from a power source if they are being shocked?
• What can be said about an aircraft that is classified under PMCS?
• What is the function of universal joints in tool use?
• What is the primary use of cotter pins in aviation?
• What happens to the aircraft involved when a tool is reported missing?
• What does "Caution" indicate in a technical publication?
• What kind of applications are castellated nuts typically used for?
• What defines an aircraft classified as PMCS?
• Technical Manuals are critical because they provide:
• What is an aerosol?
• What is the duration allowed for a daily inspection if no flight occurs?
• What does the acronym SMQ stand for within the context of NALCOMIS?
• What is the primary purpose of body PPE?
• What does the term 'mishap' imply in aviation safety?
• Which tools are NOT suitable for etching?
• How does NALCOMIS aim to improve aircraft readiness?
• What could be a consequence of mishaps in aviation?
• Which two styles of wiring are commonly used in safetying?
• What is the main purpose of using the term "Caution" in technical publications?
• What action is taken when a work order is initiated within the maintenance framework?
• What document identifies the NAMP?
• What is the primary concern of HAZMAT materials?
• In which direction should a screw be turned for removal?
• What is the main benefit of reducing administrative burden in NALCOMIS?
• What does upkeeping in maintenance refer to?
• Which type of personal protective equipment would you use to guard against skin damage from chemicals?
• What is the primary purpose of the Naval Aviation Logistics Command Management Information System (NALCOMIS)?
• How does the number of twists per inch affect safety wire performance?
• What is the primary function of an open wrench?
• How should a micrometer wrench be prepared before use?
• What does the Hazard Communication Standard (HCS) require for containers?
• What is the main focus of Intermediate Level Maintenance (I-Level)?
• Which tool is ideal for holding small objects?
• What type of screwdriver has a blunt tip and a 30-degree angle?
• What is the expected outcome of a Rapid Action Change (RAC)?
• Which of the following methods involves using a single wire for safetying?
• How are Technical Manuals beneficial for aircraft maintenance?
• What is the National Item Identification Number (NIIN)?
• What is the main purpose of the Naval Aviation Safety Program (NASP)?
• Which inspection is performed when a newly assigned aircraft is taken into service?
• What should be done if a missing tool is not found after a thorough search?
• What does the AWP status indicate for parts?
• What is the initial tool used to remove a screw to prevent drill wandering?
• What does torque refer to in the context of fasteners?
• Which of the following is classified as a hazardous material (HAZMAT)?
• Who should familiarize themselves with applicable safety regulations?
• Organizational Level Maintenance is primarily responsible for what?
• Which of the following is NOT one of the types of Technical Manual Distribution Forms?
• What is the primary focus of scheduled maintenance?
• What is another name for the Structural Hardware Manual?
• Which of the following should NOT be used when measuring torque?
• Who is the principal advisor to the Commanding Officer on ground safety matters?
• What does Depot Level Maintenance provide?
• What is one of the objectives of using NALCOMIS at aviation support?
• When installing nuts on bolts, what should be ensured?
• Which screwdriver has a pointed tip with a 45-degree angle?
• What is required for annual inspections according to OSHA?
• What is a key feature of Not Mission Capable Supply (NMCS) aircraft?
• What is the purpose of pigtails in safety wire applications?
• How should one start the installation of screws to avoid specific issues?
• What does the ICRL provide information about?
• Technical Manuals can be categorized into which two formats?
• What are the two main types of maintenance in aviation?
• What type of wrench is specifically used for rounded nuts?
• Which of the following is NOT considered hazardous material (HAZMAT)?
• What approach is used in non-destructive inspection?
• What is a defining feature of rework maintenance?
• Which tool is primarily used for holding objects securely?
• What is a characteristic of a well-maintained torque wrench?
• What is a common use for semi-permanent fasteners?
• Sizing for cotter pins is determined by which two factors?
• Which unit of measurement is NOT commonly used for torque?
• What does the acronym IRAC stand for?
• What types of content do Technical Manuals typically include?
• When should .020 and .040 wire be used?
• What type of objects does head PPE protect against?
• How should a micrometer be stored to ensure its longevity?
• What does the audible "click" from a torque wrench signify?
• Who is expected to have knowledge of safety instructions applicable to their duties?
• How many twists per inch should safety wire have?
• What is an Authorized Use List (AUL)?
• Which quality is essential for a well-organized Technical Manual?
• At which levels are technical manuals required to be used?
• What specifies the sizing of screws and bolts?
• What does RAC refer to in technical publications?
• What does the Individual Material Readiness List (IMRL) consist of?
• Which of the following is another name for the Safety Data Sheet?
• What is the most widely used type of hardware safetying?
• What is a turnaround inspection?
• Which of the following is NOT a characteristic of duckbill pliers?